Raritan PMC-1000, User Manual

Page: 266 / 621

Chapter 3: Using the Web Interface
254
5. In the "Re-scheduling Period" field, specify the time interval (in
minutes) at which the alert notification is resent or regenerated
regularly.
6. In the "Re-scheduling Limit" field, specify the maximum number of
times the alert notification is resent. Values range from 1 to infinite.
7. (Optional) You can instruct the BCM2 to send the acknowledgment
notification after the alarm is acknowledged in the Acknowledgment
Notifications field. Available methods are identical to those for
generating alarm notifications.
a.
In the Available field, select desired methods one by one, or click
Select All. See step 3 for details.
b. In the Selected field, click any method's to remove
unnecessary ones, or click Deselect All.
Action Group
You can create an action group that performs up to 32 actions. After
creating such an action group, you can easily assign this set of actions to
any event rule rather than selecting all needed actions one by one per
rule.
If the needed action is not available yet, create it first. See
Available
Actions
(on page 250).
Operation:
1. Choose Device Settings > Event Rules > .
2. Select "Execute an action group" from the Action list.
3. To select any action(s), select them one by one from the Available
Actions list.

To select all available actions, click Select All.
4. To remove any action(s) from the Selected Actions field, click that
action's
.

To remove all actions, click Deselect All.
Change Load Shedding State
The "Change load shedding state" action is available only when your
BCM2 is able to control outlet power. Use this action to activate or
deactivate the load shedding mode for responding to a specific event. For
additional information, see Load Shedding Mode.
Operation:
1. Choose Device Settings > Event Rules > .
2. Select "Change load shedding state" from the Action list.