Raritan PMC-1000, User Manual

Page: 539 / 621

527
In This Chapter
Returning User Group Information ......................................................... 527
Setting the Registry to Permit Write Operations to the Schema ........... 528
Creating a New Attribute ......................................................................... 528
Adding Attributes to the Class ................................................................ 529
Updating the Schema Cache ................................................................... 531
Editing rciusergroup Attributes for User Members ............................... 531
Returning User Group Information
Use the information in this section to return User Group information (and
assist with authorization) once authentication is successful.
From LDAP/LDAPS
When an LDAP/LDAPS authentication is successful, the BCM2
determines the permissions for a given user based on the permissions of
the user's . Your remote LDAP server can provide these user names by
returning an attribute named as follows:
rciusergroup attribute type: string
This may require a schema extension on your LDAP/LDAPS server.
Consult your authentication server administrator to enable this attribute.
In addition, for Microsoft
®
Active Directory
®
, the standard LDAP
memberOf is used.
From Microsoft Active Directory
Note: This should be attempted only by an experienced Active Directory
®
administrator.
Returning user information from Microsoft's
®
Active Directory for
Windows 2000
®
operating system server requires updating the
LDAP/LDAPS schema. See your Microsoft documentation for details.
1.
Install the schema plug-in for Active Directory. See Microsoft Active
Directory documentation for instructions.
2. Run Active Directory Console and select Active Directory Schema.
Appendix C Updating the LDAP Schema