Raritan PMC-1000, User Manual

Page: 480 / 621

Chapter 5: Using the Command Line Interface
468
• <auth_port> is the authentication port number.
• <acct_port> is the accounting port number.
•
<timeout> is the timeout value in seconds. It ranges between 1 to 10
seconds.
•
<retries> is the number of retries. It ranges between 0 to 5.
To enter the shared secret:
1. After executing the above Radius command, the system
automatically prompts you to enter the shared secret.
2. Type the secret and press Enter.
3. Re-type the same secret and press Enter.
Example:
config:# authentication radius add 192.168.7.99 chap 1812 1813 10 3
Modifying an Existing Radius Server
You can modify one or multiple parameters of an existing Radius server,
or change the priority or sequence of existing servers in the server list.
Change the IP address or host name:
config:# authentication radius modify <server_num> host <host>
Change the Radius authentication type:
config:# authentication radius modify <server_num> authType <rds_type>
Change the authentication port:
config:# authentication radius modify <server_num> authPort <auth_port>
Change the accounting port:
config:# authentication radius modify <server_num> accountPort <acct_port>
Change the timeout value:
config:# authentication radius modify <server_num> timeout <timeout>
Change the number of retries: