Raritan PMC-1000, User Manual

Page: 190 / 621

Chapter 3: Using the Web Interface
178
Static Route Examples
This section describes two static route examples: IPv4 and IPv6. Both
examples assume that two network interface controllers (NIC) have been
installed in one network server, leading to two available subnets, and IP
forwarding has been enabled. All of the NICs and BCM2 devices in the
examples use static IP addresses.
Most of local multiple networks are not directly reachable and require
the use of a gateway. Therefore, we will select Gateway in the following
examples. If your local multiple networks are directly reachable, you
should select Interface rather than Gateway.
Note: If Interface is selected, you should select an interface name
instead of entering an IP address. See
Interface Names
(on page 181).
IPv4 example:
•
Your BCM2:
192.168.100.64
•
Two NICs: 192.168.200.75 and 192.168.100.88
• Two networks:
192.168.200.0 and 192.168.100.0
• Prefix length:
24