Raritan PMC-1000, User Manual

Page: 161 / 621

Chapter 3: Using the Web Interface
149
b. Click Edit Thresholds.
c. Enable and set the desired thresholds and deassertion
hysteresis.
Note that assertion timeout is NOT available on LHX/SHX.
d. Click Save.
3. After thresholds are enabled, sensors may be highlighted in yellow
or red if they enter the warning or critical range. See
Yellow- or
Red-Highlighted Sensors
(see "
The Yellow- or Red-Highlighted
Sensors
" on page 90, on page 121).
Tip: You can also create event rules to notify you of the warning or
critical levels. See
Event Rules and Actions
(on page 230).
To view sensor alerts and LHX event log:
Remote alert acknowledgment is supported by the LHX-20 and LHX-40.
The SHX-30 does not support this feature.
1.
Locate the Alert States section.