Raritan PMC-1000, User Manual

Page: 14 / 621

Chapter 1: Installation and Initial Configuration
2
Hardware Installation
BCM2 supports two hardware options. Select your hardware version for
installation instructions:
•
BCM2 9600 series
(see "
BCM2 Series Hardware Installation
" on
page 2)
•
PM Series: PMC-1000, PMC-1001, PMM-1000, PMB-1960,
PMMC-1000 (see " PM Series Hardware Installation: PMC-1000,
PMC-1001, PMM-1000, PMB-1960, PMMC-1000
" on page 13)
BCM2 Series Hardware Installation
Safety Information
DANGER!
HAZARD OF ELECTRIC SHOCK, EXPLOSION, OR ARC FLASH

Follow safe electrical work practices. See NFPA 70E in the USA, or
applicable local codes.

This equipment must only be installed and serviced by qualified
electrical personnel.

Read, understand and follow the instructions before installing this
product.

Turn off all power supplying equipment before working on or inside
the equipment.

Any covers that may be displaced during the installation must be
reinstalled before powering the unit.

Use a properly rated voltage sensing device to confirm power is off.

DO NOT DEPEND ON THIS PRODUCT FOR VOLTAGE INDICATION

Failure to follow these instructions will result in death or serious
injury.
NOTICE

This product is not intended for life or safety applications.

Do not install this product in hazardous or classified locations.

The installer is responsible for conformance to all applicable codes.

Mount this product inside a suitable fire and electrical enclosure.
CAUTION