Raritan PMC-1000, User Manual

Page: 184 / 621

Chapter 3: Using the Web Interface
172
Field Description
DNS Resolver
Reference
Determine which IP address is used when the
DNS resolver returns both IPv4 and IPv6
addresses.

IPv4 Address: Use the IPv4 addresses.

IPv6 Address: Use the IPv6 addresses.
DNS Suffixes
(optional)
Specify a DNS suffix name if needed.
First/Second/Third
DNS Server
Manually specify static DNS server(s).

If any static DNS server is specified in these
fields, it will override the DHCP-assigned DNS
server.

If DHCP (or Automatic) is selected for
IPv4/IPv6 settings, and there are NO static
DNS servers specified, the BCM2 will use
DHCP-assigned DNS servers.
IPv4/IPv6 Routes You need to configure these settings only when
your local network contains two subnets, and you
want BCM2 to communicate with the other
subnet.
If so, make sure IP forwarding has been enabled
in your network, and then you can click 'Add
Route' to add static routes.
See
Static Route Examples (on page 178).
Ethernet Interface Settings
By default the Ethernet interface on BCM2 or ETH1/ETH2 interface on
BCM2-iX7 is enabled.
Enable Interface:
Make sure the Ethernet interface is enabled, or all networking through
this interface fails. This setting is available in the ETHERNET section, but
not available in the BRIDGE section.