Raritan PMC-1000, User Manual

Page: 460 / 621

Chapter 5: Using the Command Line Interface
448
Set the preferred length unit:
config:# user modify <name> preferredLengthUnit <option2>
Variables:
•
<name> is the name of the user whose settings you want to change.
•
<option2> is one of the options:
meter or feet.
Option Description
meter This option displays the length or height in
meters.
feet This option displays the length or height in feet.
Set the preferred pressure unit:
config:# user modify <name> preferredPressureUnit <option3>
Variables:
•
<name> is the name of the user whose settings you want to change.
•
<option3> is one of the options: pascal or psi.
Option Description
pascal This option displays the pressure value in Pascals
(Pa).
psi This option displays the pressure value in psi.
Specifying the SSH Public Key
If the SSH key-based authentication is enabled, specify the SSH public
key for each user profile using the following procedure.
To specify or change the SSH public key for a specific user:
1. Type the SSH public key command as shown below and press Enter.
config:# user modify <name> sshPublicKey
2. The system prompts you to enter the contents of the SSH public key.
Do the following to input the contents:
a.
Open your SSH public key with a text editor.
b. Copy all contents in the text editor.
c. Paste the contents into the terminal.