Raritan PMC-1000, User Manual

Page: 500 / 621

Chapter 5: Using the Command Line Interface
488
Actuator Configuration Commands
An actuator configuration command begins with
actuator. You can
configure the name and location parameters of an individual actuator.
You can configure various parameters for one actuator at a time. See
Multi-Command Syntax
(on page 504).
Change the name:
config:# actuator <n> name "<name>"
Set the X coordinate:
config:# actuator <n> xlabel "<coordinate>"
Set the Y coordinate:
config:# actuator <n> ylabel "<coordinate>"
Set the Z coordinate:
config:# actuator <n> zlabel "<z_label>"
Modify the actuator's description:
config:# actuator <n> description "<description>"
Variables:
• <n> is the ID number assigned to the actuator. The ID number can be
found using the BCM2 web interface or CLI. It is an integer starting
at 1.
•
<name> is a string comprising up to 64 ASCII printable characters.
The <name> variable must be enclosed in quotes when it contains
spaces.
• <coordinate> is a string comprising up to 24 ASCII printable
characters, and it must be enclosed in quotes.
• There are two types of values for the <z_label> variable, depending
on the Z coordinate format you set:
Type Description
Free form <coordinate> is a string comprising up to 24 ASCII
printable characters, and it must be enclosed in
quotes.
Rack units <coordinate> is an integer number in rack units.