Raritan PMC-1000 User Manual Download Page 330

Page: 330 / 621

Chapter 3: Using the Web Interface

318

Full Disaster Recovery

If the firmware upgrade fails, causing the BCM2 device to stop working,

you can recover it by using a special utility rather than returning the

device to Raritan.
Contact Raritan Technical Support for the recovery utility, which works in

Windows XP/Vista/7/10 and Linux. In addition, an appropriate BCM2

firmware file is required in the recovery procedure.
Note: All BCM2 PDUs, except for iX7

™

PDUs, can be recovered via either a

USB or serial RS-232 connection. For iX7

™

, disaster recovery can be

performed via the USB connection only.

Viewing Firmware Update History

The firmware upgrade history is permanently stored on the BCM2. It
remains available even though you perform a device reboot or any

firmware update.

To view the firmware update history:

Choose Maintenance > Firmware History.

Each firmware update event consists of:



Update date and time



Previous firmware version



Update firmware version



Update result

If wanted, you can resort the list by clicking the desired column

header. See Sorting a List.

Summary of Contents for PMC-1000













































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for PMC-1000

Reviews:

Related manuals for PMC-1000

Brands by name

Popular brands

Raritan PMC-1000, User Manual

Search results

Summary of Contents for PMC-1000

Reviews:

Related manuals for PMC-1000

Brands by name

Popular brands