Raritan PMC-1000, User Manual

Page: 603 / 621

Appendix E: Additional BCM2 Information
591
The content to be copied from the CA certificate does NOT include the
first line containing "BEGIN CERTIFICATE" and the final line containing
"END CERTIFICATE." If a certificate is installed, configure the following:
Whether to Use this command
Verify the
certificate
network wireless
enableCertVerification
<option1>
<option1> =
true or false
Accept an
expired or
not valid
certificate
network wireless
allowOffTimeRangeCerts
<option2>
<option2> =
true or false
Make the
connection
successful by
ignoring the
"incorrect"
system time
network wireless
allowConnectionWithIncorrectC
lock <option3>
<option3> =
true or false
• Wireless IPv4 / IPv6 settings:
Commands for wireless IP settings are identical to those for wired
networking. Just replace the variable <ETH> with the word 'wireless'.
The following illustrates a few examples.
To set or
enable
Use this command
IPv4
configuration
method
network ipv4 interface
WIRELESS configMethod <mode>
<mode> = dhcp (default) or static
IPv6
configuration
method
network ipv6 interface
WIRELESS configMethod <mode>
<mode> =
automatic (default) or static
To verify network settings:
After exiting the above configuration mode and the # prompt re-appears,
type this command to verify all network settings.
show network