Raritan PMC-1000, User Manual

Page: 279 / 621

Chapter 3: Using the Web Interface
267
b. Type the key and value.
c. Repeat the same steps to enter more arguments as needed.

To remove any existing argument, click adjacent to
it.
Switch LHX/SHX
If Schroff LHX/SHX Support is enabled, the LHX/SHX-related actions will
be available. See
Miscellaneous
(on page 303).
Use this action to switch the LHX/SHX on or off when, for example,
temperature thresholds are reached.
Operation:
1. Choose Device Settings > Event Rules > .
2. Select "Switch LHX/SHX" from the Action list.
3. In the Operation field, select Turn LHX/SHX On or Turn LHX/SHX Off.
4. In the Available LHX/SHX field, select the LHX/SHX device to be
turned on or off. To select all available LHX/SHX devices, click Select
All.
To remove any LHX/SHX device from the Selected LHX/SHX field,
click that device's
. To remove all devices, click Deselect All.
Switch Outlets
The "Switch outlets" action is available only when your BCM2 is
outlet-switching capable. This action turns on, off or power cycles a
specific outlet.
Operation:
1. Choose Device Settings > Event Rules > .
2. Select "Switch outlets" from the Action list.
3. In the Operation field, select an operation for the selected outlet(s).

Turn Outlet On: Turns on the selected outlet(s).

Turn Outlet Off: Turns off the selected outlet(s).

Cycle Outlet: Cycles power to the selected outlet(s).
4. To specify the outlet(s) where this action will be applied, select them
one by one from the Available Outlets list.

To add all outlets, click Select All.
5. To remove any outlets from the Selected Outlets field, click that
outlet's
.

To remove all outlets, click Deselect All.