Raritan EMX2-888, User Manual

Page: 34 / 568

Chapter 3: Installation and Configuration
20

For static IP configuration, configure these parameters.
To set Use this command
Static IPv4 or
IPv6 address
network <version> ipAddress <ip
address>
<ip address> = static IP address
IPv4 subnet
mask
network ipv4 subnetMask
<netmask>
<netmask> = subnet mask
IPv4 or IPv6
gateway
network <version> gateway <ip
address>
<ip address> = gateway's IP address
IPv4 or IPv6
primary DNS
server
network <version>
primaryDNSServer <ip address>
<ip address> = IP address of the
primary DNS server
IPv4 or IPv6
secondary
DNS server
(optional)
network <version>
secondaryDNSServer <ip
address>
<ip address> = IP address of the
secondary DNS server
9. To quit the configuration mode, type either of the following
commands, and press Enter.
Command Description
apply
Save all configuration changes and exit.
cancel
Abort all configuration changes and exit.
The # prompt appears, indicating that you have quit the configuration
mode.
10. To verify whether all settings are correct, type the following
commands one by one.
Command Description
show network
Show network parameters.
show network ip
all Show all IP configuration
parameters.
show network
wireless
details
Show all wireless parameters.