Raritan EMX2-888, User Manual

Page: 130 / 568

Chapter 6: Using the Web Interface
116
Option Description
mask using the format "IP address/subnet mask."
 Next Hop: IP address of the next hop router.
See
Static Route Examples
(on page 118) for illustrations.
4. Click OK.
Note: The EMX supports a maximum of 3 DNS servers. If two IPv4 DNS
servers and two IPv6 DNS servers are available, the EMX only uses the
primary IPv4 and IPv6 DNS servers.
Modifying IPv6 Settings
You must enable the IPv6 protocol before you can modify the IPv6
network settings. See
Selecting the Internet Protocol
(on page 114).
To modify IPv6 settings:
1. Choose Device Settings > Network. The Network Configuration
dialog appears.
2. Click the IPv6 Settings tab.
3. In the IP Auto Configuration field, click the drop-down arrow, and
select the desired option from the list.
Option Description
Automatic To auto-configure the EMX, select Automatic.
With this option selected, you can enter a preferred host
name, which is optional. Type the host name in the
Preferred Hostname field.
The host name:
 Consists of alphanumeric characters and/or
hyphens
 Cannot begin or end with a hyphen
 Cannot contain more than 63 characters
 Cannot contain punctuation marks, spaces, and
other symbols
Select the "Specify DNS server manually" checkbox if
necessary. Then type the address of the primary DNS
server in the Primary DNS Server field. The secondary
DNS server and DNS suffix are optional.
Static To manually assign an IP address, select Static, and enter
the following information in the corresponding fields: