Raritan EMX2-888, User Manual

Page: 376 / 568

Chapter 8: Using the Command Line Interface
362
Enabling or Disabling SNMP v3
This command enables or disables the SNMP v3 protocol.
config:# network services snmp v3 <option>
Variables:

<option> is one of the options:
enable
or
disable
.
Option Description
enable The SNMP v3 protocol is enabled.
disable The SNMP v3 protocol is disabled.
Setting the SNMP Read Community
This command sets the SNMP read-only community string.
config:# network services snmp readCommunity <string>
Variables:

<string> is a string comprising 4 to 64 ASCII printable characters.

The string CANNOT include spaces.
Setting the SNMP Write Community
This command sets the SNMP read/write community string.
config:# network services snmp writeCommunity <string>
Variables:

<string> is a string comprising 4 to 64 ASCII printable characters.

The string CANNOT include spaces.
Setting the sysContact Value
This command sets the SNMP MIB-II sysContact value.
config:# network services snmp sysContact <value>
Variables:

<value> is a string comprising 0 to 255 alphanumeric characters.