Raritan EMX2-888, User Manual

Page: 253 / 568

Chapter 6: Using the Web Interface
239
4. Click Yes on the confirmation message.
5. Click Close to quit the dialog.
Checking Server Monitoring States
Server monitoring results are available in the Server Reachability dialog
after specifying IT devices for the EMX device to monitor their network
accessibility.
To check the server monitoring states and results:
1. Choose Device Settings > Server Reachability. The Server
Reachability dialog appears.
2. The column labeled "Ping Enabled" indicates whether the monitoring
for the corresponding IT device is activated or not.
 : This icon denotes that the monitoring for the corresponding
device is enabled.
 : This icon denotes that the monitoring for the corresponding
device is disabled.
3. The column labeled "Status" indicates the accessibility of each
monitored equipment.
Status Description
Reachable The monitored equipment is accessible.
Unreachable The monitored equipment is inaccessible.
Waiting for reliable
connection The connection between the EMX device and the
monitored equipment is not reliably established
yet.
4. Click Close to quit the dialog.
Environmental Sensors and Actuators
The EMX can monitor the environmental conditions, such as temperature
and humidity, where environmental sensors are placed. If an actuator is
connected to the EMX, you can use it to control a system or mechanism.
To add environmental sensors and actuators:
1. Physically connect environmental sensor packages to the EMX
device. See
Connecting Environmental Sensor Packages
(on
page 39).
2. Log in to the EMX web interface. The EMX should have detected the
connected sensors and actuators, and display them in the web
interface.