Raritan EMX2-888, User Manual

Page: 146 / 568

Chapter 6: Using the Web Interface
132
Configuring the Feature Port
The EMX device supports connecting one of the following devices to its
FEATURE port:

Raritan asset management sensors (asset sensors). See
Connecting Asset Management Sensors
(on page 25).

External beeper. See
Connecting an External Beeper
(on page
61).

Schroff ® LHX-20, SHX-30 or LHX-40 heat exchanger. See
Connecting a Schroff LHX/SHX Heat Exchanger
(on page 61).
By default, the FEATURE port can automatically detect and display the
device connected to the FEATURE port. The only exception is the
Schroff
® LHX/SHX device, which requires enabling the LHX/SHX support
before the EMX can detect or display it. See
Managing the Schroff
LHX/SHX Heat Exchanger
(on page 272).
You can change the mode applied to the FEATURE port so that the EMX
web interface only displays the device in the manner you wish.
To configure the FEATURE port:
1. Click the Feature Port folder. The Feature Port page opens in the
right pane.
2. Select the Port# 1 device on the Feature Port page, and click Setup.
The Feature Port Setup dialog appears.
3. Select the desired mode in the Detection Mode field.
 Auto: The EMX automatically detects and displays the device
connected to the FEATURE port. This is the default.
 Disabled: The FEATURE port is disabled so the EMX does not
detect and display the connected device.
 A specific device type: The EMX always displays the selected
device type no matter which device is connected or whether the
selected device is detected or not. After selecting a device type,
the Mode column shows "Pinned." Available device types are
listed below.
Device type Description
Asset Strip Raritan asset sensors.
External
Beeper An external beeper with the RJ-45 socket.