Raritan EMX2-888 User Manual Download Page 305

Page: 305 / 568

Chapter 6: Using the Web Interface

291

Firmware Upgrade

You may upgrade your EMX device to benefit from the latest
enhancements, improvements and features.

Firmware files are available on Raritan website's

Support page

(

http://www.raritan.com/support/

Updating the EMX Firmware

You must be the system administrator or log in to the user profile with the
Firmware Update permission to update the EMX firmware.

Before starting the upgrade, read the release notes downloaded from the
Raritan website's

Support page

(

http://www.raritan.com/support/

). If

you have any questions or concerns about the upgrade, contact Raritan
Technical Support BEFORE upgrading.

Warning: Do NOT perform the firmware upgrade over a wireless network
connection.

To update the firmware:

1. Choose Maintenance > Update Firmware. The Update Firmware

dialog appears.

2. In the Firmware File field, click Browse to select an appropriate

firmware file.

3. Click Upload. A progress bar appears to indicate the upload status.

4. When the upload is complete, version information of both the existing

firmware and uploaded firmware is shown, providing you a last
chance to terminate the update.

5. To view the certificate of the uploaded firmware, click View

Certificate.

Optional.

6. To proceed with the update, click Update Firmware. The update may

take several minutes.

Warning: Do NOT power off the EMX during the update.

During the firmware update:



A progress bar appears in the web interface, indicating the

update status.



The front panel display on the EMX shows three digits: 'FuP' or

'FUP.'



No users can successfully log in to the EMX.



The user management operation, if any, is forced to suspend.

Summary of Contents for EMX2-888
























































































































































































































































































































































































































































































































































































Search results

Summary of Contents for EMX2-888

Reviews:

Related manuals for EMX2-888

Brands by name

Popular brands

Raritan EMX2-888, User Manual

Search results

Summary of Contents for EMX2-888

Reviews:

Related manuals for EMX2-888

Brands by name

Popular brands