Appendix H: RADIUS Configuration Illustration
520
Step C: Configure a Vendor-Specific Attribute
You must specify a vendor-specific attribute (VSA) for Raritan on
Windows 2008 NPS. Raritan's vendor code is
13742
.
In the following illustration, we assume:
There are three roles available on your EMX:
Admin
,
User
, and
SystemTester
.
To configure VSA:
1. Open the NPS console, and expand the Policies folder.
2. Select Connection Request Policies and double-click the policy
where you want to add a custom VSA. The policy's properties dialog
appears.
3. Click the Settings tab.
4. Select Vendor Specific, and click Add. The Add Vendor Specific
Attribute dialog appears.
5. Select Custom in the Vendor field, and click Add. The Attribute
Information dialog appears.
6. Click Add, and the Vendor-Specific Attribute Information dialog
appears.
7. Click "Enter Vendor Code" and type
13742
.
8. Select "Yes, it conforms" to indicate that the custom attribute
conforms to the RADIUS Request For Comment (RFC).
9. Click Configure Attribute, and then:
Summary of Contents for EMX2-888
