Raritan EMX2-888, User Manual

Page: 286 / 568

Chapter 6: Using the Web Interface
272
Managing the Schroff LHX/SHX Heat Exchanger
The EMX supports monitoring and administering the Schroff
®
LHX-20,
LHX-40 and SHX-30 heat exchanger if this device is connected to the
EMX.
From the EMX, you can do the following remotely:

Name a connected LHX heat exchanger

Monitor LHX sensors and operational states

Configure the air outlet temperature setpoint

Configure the default fan speed

Configure sensor thresholds (for alert generation)

Request maximum cooling using the fan speed and opening the cold
water valve

Acknowledge alerts remotely (for example, return to normal
operation after maximum cooling is requested)
The exact information is dependent on your Schroff model. See your
Schroff LHX/SHX manual for details on each device's settings and
features.
To monitor one LHX/SHX heat exchanger using the EMX:
1. Connect an LHX-20, LHX-40 or SHX-30 heat exchanger to the EMX
if it is not connected yet. See
Connecting a Schroff LHX/SHX Heat
Exchanger
(on page 61).
2. Enable the support of LHX/SHX heat exchanger on the EMX. See
Enabling and Disabling Schroff LHX/SHX Heat Exchanger
Support
(on page 273).
3. Configure the connected heat exchanger. See
Configuring the
LHX/SHX
(on page 274).
4. Now you can remotely monitor or control the connected LHX/SHX
heat exchanger via the EMX.
 To monitor the heat exchanger, see
Monitoring the LHX/SHX
(on page 277).

To control the heat exchanger, see
Turning the LHX/SHX On or
Off
(on page 282).