Raritan EMX2-888, User Manual

Page: 273 / 568

Chapter 6: Using the Web Interface
259
 Bottom-Up: The rack units are numbered in the descending order
from the highest to the lowest rack unit.
9. In the Numbering Offset field, select the starting number. For
example, if you select 3, the first rack unit is numbered 3, the second
is numbered 4, the third is numbered 5, and so on until the final
number.
10. Indicate how the asset sensor is mounted on the rack in the
Orientation field. The rack unit that is most close to the RJ-45
connector of the asset sensor will be marked with the index number
1 in the web interface.
For the latest version of asset sensors with a built-in tilt sensor, it is
NOT necessary to configure the orientation setting manually. The
EMX device can detect the orientation of the asset sensors and
automatically configure it.
 Top Connector: This option indicates that the asset sensor is
mounted with the RJ-45 connector located on the top.
 Bottom Connector: This option indicates that the asset sensor is
mounted with the RJ-45 connector located at the bottom.
11. Change the LED color settings as needed. See
Setting Asset
Sensor LED Colors
(on page 260).