Chapter 8: Using the Command Line Interface
386
config:#
security roleBasedAccessControl ipv4 rule modify <rule_number> role <role>
Modify an IPv4 rule's policy:
config:#
security roleBasedAccessControl ipv4 rule modify <rule_number> policy
<policy>
Modify all contents of an existing IPv4 rule:
config:#
security roleBasedAccessControl ipv4 rule modify <rule_number>
startIpAddress
<start_ip>
endIpAddress
<end_ip>
role
<role>
policy
<policy>
IPv6 commands
Modify a rule's IPv6 address range:
config:#
security roleBasedAccessControl ipv6 rule modify <rule_number>
startIpAddress <start_ip> endIpAddress <end_ip>
Modify an IPv6 rule's role:
config:#
security roleBasedAccessControl ipv6 rule modify <rule_number> role <role>
Modify an IPv6 rule's policy:
config:#
security roleBasedAccessControl ipv6 rule modify <rule_number> policy
<policy>
Modify all contents of an existing IPv6 rule:
Summary of Contents for EMX2-888
