Raritan EMX2-888, User Manual

Page: 308 / 568

Chapter 6: Using the Web Interface
294
3. In the Number of Requests field, type a number up to 20 or adjust
the value by clicking either arrow. This number determines how
many packets are sent for pinging the host.
4. Click Run Ping to start pinging the host. A dialog appears, displaying
the Ping results.
5. Click Close to quit the dialog.
Tracing the Network Route
Trace Route lets you find out the route over the network between two
hosts or systems.
To trace the route for a host:
1. Choose Maintenance > Network Diagnostics > Trace Route. The
"Trace Route to Host" dialog appears.
2. Type the IP address or name of the host whose route you want to
check in the Host Name field.
3. In the Timeout (s) field, type a timeout value in seconds to end the
trace route operation. Note that if the timeout value is too small, the
trace route results may be incomplete.
4. To use the Internet Control Message Protocol (ICMP) packets to
perform the trace route command, select the Use ICMP Packets
checkbox.
5. Click Run. A dialog appears, displaying the Trace Route results.
Listing TCP Connections
You can use the "List TCP Connections" to display a list of TCP
connections.
To list TCP connections:
1. Choose Maintenance > Network Diagnostics > List TCP Connections.
The TCP Connections window appears.
2. Click Close to quit the dialog.
Downloading Diagnostic Information
Important: This function is for use by Raritan Field Engineers or when
you are directed by Raritan Technical Support.