Chapter 6: Using the Web Interface
142
Slave 1 device:
Position code for Slave 1 is 01 so each port number is 5NN01 as shown
below.
Protocols
Port numbers
HTTPS 50001
HTTP 50101
SSH 50201
TELNET 50301
SNMP 50501
MODBUS 50601
Examples:
To access Slave 1 via HTTPS, the IP address is:
https://192.168.84.77:50001/
To access Slave 1 via HTTP, the IP address is:
http://192.168.84.77:50101/
To access Slave 1 via SSH, the command is:
ssh -p 50201 192.168.84.77
Slave 2 device:
Position code for Slave 2 is 02 so each port number is 5NN02 as shown
below.
Protocols
Port numbers
HTTPS 50002
HTTP 50102
SSH 50202
TELNET 50302
SNMP 50502
MODBUS 50602
Examples:
To access Slave 2 via HTTPS, the IP address is:
https://192.168.84.77:50002/
To access Slave 2 via HTTP, the IP address is:
http://192.168.84.77:50102/
Summary of Contents for EMX2-888
