Raritan EMX2-888, User Manual

Page: 428 / 568

Chapter 8: Using the Command Line Interface
414
Example - Default Upper Thresholds for Temperature
It is assumed that your preferred measurement unit for temperature is
set to degrees Celsius. Then the following command sets the default
Upper Warning threshold to 20
and Upper Critical threshold to 24
for all temperature sensors.
config:# defaultThresholds temperature upperWarning 20
upperCritical 24
Environmental Sensor Threshold Configuration Commands
You can use the sensor threshold configuration commands to set the
threshold, hysteresis and assertion timeout values for any environmental
sensor.
It is permitted to assign a new value to the threshold at any time
regardless of whether the threshold has been enabled.
Threshold Configuration Commands for a Sensor
A sensor threshold configuration command for environmental sensors
begins with
sensor externalsensor
.
You can configure various environmental sensor threshold settings at a
time by combining multiple commands. See
Multi-Command Syntax
(on page 431).
Set the Upper Critical threshold for an environmental sensor:
config:# sensor externalsensor <n> <sensor type> upperCritical <option>
Set the Upper Warning threshold for an environmental sensor:
config:# sensor externalsensor <n> <sensor type> upperWarning <option>
Set the Lower Critical threshold for an environmental sensor:
config:# sensor externalsensor <n> <sensor type> lowerCritical <option>
Set the Lower Warning threshold for an environmental sensor: