Panasonic VB-44210G User Manual Download Page 63

Page: 63 / 394

Section 700 - Operation

Chapter 3. System Features

DBS-2.3/9.2-700

DBS Manual - Revised April 2000

Page 3-17

Related Programming

• FF1 (System): Multiple DID (CPC-B Version 3.1 or higher)

• FF3 (Extension): Inbound DID Dial Number (CPC-B Version 2.0 to 2.16)

• FF4 (Ring): DID, Delayed, Night , Delayed Night, Night 2, and Delayed

Night 2 Ring Assignments

Hardware Requirements

• Either the T-1 Card or DID trunk card is required. Each DID trunk card

provides 8 ports.

• The DID trunk card requires an external 48V power supply. See

Installation (Section 300)

for instructions.

Considerations

• The DID Trunk card supports 4-digit, dial-pulse DID.

• The T1 card supports 4-digit, dial-pulse or DTMF DID.

• DID numbers must be between 0000 and 9999.

• Beginning with CPC-B Version 3.1, a maximum of 500 DID/extension

settings is allowed.

DID Night Ringing Assignment

(CPC-B Version 5.0 or higher)

Description

For a description of this feature, see “DID/DNIS Flexible Ring Assignments”
on page 3-18.

Summary of Contents for VB-44210G











































































































































































































































































































































































































Search results

Summary of Contents for VB-44210G

Reviews:

Related manuals for VB-44210G

Brands by name

Popular brands

Panasonic VB-44210G, User Manual

Search results

Summary of Contents for VB-44210G

Reviews:

Related manuals for VB-44210G

Brands by name

Popular brands