Panasonic VB-44210G User Manual Download Page 167

Page: 167 / 394

Section 700 - Operation

Chapter 4. Key Telephone Features

DBS-2.3/9.2-700

DBS Manual - Revised April 2000

4-51

To check a programmed FF key:

1. Press

the

ON/OFF

key:

• The phone issues intercom dial tone.

• The

ON/OFF

LED lights.

2. Press

the

CONF

key.

“C” appears in the display.

3. Press the FF key to be checked.

The programmed data appears on the display.

4. Press

the

ON/OFF

key.

• The

ON/OFF

LED goes off.

• The date and time appear on the display.

Related Programming

• FF5 (FF Keys): FF Key Assignments for Extensions

• FF9 (Copy Program): FF Key Copy

Considerations

• The following functions can be assigned to FF keys:

Table 4-6. Feature access codes for FF key assignments

Feature

Code to be entered

Call Attendant

Intercom Call

Extension number (10-69) or (100-699)

Outside Line

88, outside line number (01-64)

Pooled Trunk Access

Outside line group number (89, 81-86)

Note:

“9” can be used as an outside line group number if it

is not used for LCR.

LCR

Paging

#, Paging Group number (00-07)

Call Park

Call Park Retrieve

Summary of Contents for VB-44210G











































































































































































































































































































































































































Search results

Summary of Contents for VB-44210G

Reviews:

Related manuals for VB-44210G

Brands by name

Popular brands

Panasonic VB-44210G, User Manual

Search results

Summary of Contents for VB-44210G

Reviews:

Related manuals for VB-44210G

Brands by name

Popular brands