Panasonic VB-44210G User Manual Download Page 213

Page: 213 / 394

Section 700 - Operation

Chapter 4. Key Telephone Features

DBS-2.3/9.2-700

DBS Manual - Revised April 2000

4-97

Related Programming

• FF3 (Extensions): Extension Lockout Code

Considerations

• A locked extension can be used for Intercom Calls.

• Station Lockout key codes can only be set from an attendant phone or a

key phone.

• You cannot confirm Speed Dialing or set Speed Dialing while Station

Lockout is activated.

• If you enter an incorrect key code and then try to dial, the phone will issue

a busy tone.

• If station lockout is set, when

ON/OFF

is pressed, stutter dial tone is heard

followed by steady dial tone.

Trunk-to-Trunk Transfer

(All Versions)

Description

Trunk-to-trunk transfer allows an extension to transfer one outside party to
another outside party.

Before completing the transfer, the extension can hold a three-way
conference with the two outside parties.

Operation

1. Press

the

HOLD

key during an outside call.

• Your current call is put on hold.

• “Hold #XX” (where “XX” is the line number) appears on the display.

2. Press an unlit CO key.

• The phone issues outside dial tone.

• “Talk #XX” (where “XX” is the selected line number) appears on the

display.

Summary of Contents for VB-44210G











































































































































































































































































































































































































Search results

Summary of Contents for VB-44210G

Reviews:

Related manuals for VB-44210G

Brands by name

Popular brands

Panasonic VB-44210G, User Manual

Search results

Summary of Contents for VB-44210G

Reviews:

Related manuals for VB-44210G

Brands by name

Popular brands