Panasonic VB-44210G User Manual Download Page 184

Page: 184 / 394

Chapter 4. Key Telephone Features

Section 700 - Operation

4-68

DBS Manual - Revised April 2000

DBS-2.3/9.2-700

Message Waiting/Callback Request

(All Versions)

Description

If you try to call an extension that is busy or does not answer, you can leave a
message requesting a return call.

Operation

To leave a Callback Request:

1. Press

the

ON/OFF

key.

2. Dial the extension number.

“Call-EXT XXX,” “Busy-EXT XXX” or “Talk-EXT XXX” (where
“XXX” is the extension) appears on the display.

3. Dial “2” at the busy tone or while the telephone is still ringing.

“Accept Message” appears on the display.

4. Press

the

ON/OFF

key.

The Message Waiting lamp flashes at the called extension.

To answer a Callback Request:

1. Pick up the handset.

The phone issues intercom dial tone.

2. Press

the

AUTO

key.

3. Press

the

REDIAL

key.

• Your telephone automatically dials the extension that left the Callback

Request.

• If extension 135 left the Callback Request and If your extension is set

for Tone Calling, “Call-EXT XXX” (where “XXX” is the number of
the extension that left the Callback Request) appears on the display.

Summary of Contents for VB-44210G











































































































































































































































































































































































































Search results

Summary of Contents for VB-44210G

Reviews:

Related manuals for VB-44210G

Brands by name

Popular brands

Panasonic VB-44210G, User Manual

Search results

Summary of Contents for VB-44210G

Reviews:

Related manuals for VB-44210G

Brands by name

Popular brands