Panasonic VB-44210G User Manual Download Page 234

Page: 234 / 394

Chapter 5. DSLT Features

Section 700 - Operation

5-16

DBS Manual - Revised April 2000

DBS-2.3/9.2-700

Call Transfer

(All Versions)

The DBS provides two call transfer methods: blind transfer and screened
transfer.

Blind Transfer

Description

Blind transfer allows the transfer of a call directly to an extension, without
waiting for the called extension to answer.

Operation

1. Press

the

HOLD

key to place the call on hold.

2. Dial the extension number to which the call is to be transferred.

3. Replace the handset before the other party answers.

• You can also replace the handset after the third party answers.

• The third party need only pick up the handset to speak to the outside

line.

Related Programming

• FF1 (System): Onhook (Automatic) Transfer

• FF1 (System): Recall Timer for Extension-Transferred CO Calls

• FF1 (System): Recall Timer for Attendant-Transferred CO Calls

Considerations

• For users to transfer calls by pressing

HOLD

, dialing an extension, and

going onhook, the Onhook Transfer feature must be enabled.

• You cannot transfer a call to an extension that has Do Not Disturb or

Absence Message activated.

• You can transfer a call to an extension that has Call Forwarding activated.

The transferred call will follow the call forwarding path of the extension it
is transferred to.

Summary of Contents for VB-44210G











































































































































































































































































































































































































Search results

Summary of Contents for VB-44210G

Reviews:

Related manuals for VB-44210G

Brands by name

Popular brands

Panasonic VB-44210G, User Manual

Search results

Summary of Contents for VB-44210G

Reviews:

Related manuals for VB-44210G

Brands by name

Popular brands