Panasonic VB-44210G User Manual Download

Page: 157 / 394

Section 700 - Operation

Chapter 4. Key Telephone Features

DBS-2.3/9.2-700

DBS Manual - Revised April 2000

4-41

To establish an Unsupervised Conference Call:

1. Press

HOLD

or the line key of your current call to place it on hold.

The outside line number or name of the party on hold appears on the
display.

2. Press an unlit line key .

• The line LED lights green.

• The phone issues outside dial tone.

• “CO TALK #XX” (where “XX” is the line number) appears on the

display.

3. Dial the number of the party you wish to add to the call.

The number appears on the display.

4. Press

the

CONF

key when your call is answered.

“CONF #XX #YY” (where “XX” is the first line and “YY” is the second
line) appears on the display.

5. To drop out of the conference and establish the Unsupervised Conference

Call, press

HOLD

6. To return to the call, press one of the conference line keys.

• The SCC-A card provides 3 four-party conference circuits. The SCC-B

provides 8 four-party conference circuits

• Press

FLASH

or hang up to exit a Conference Call.

• The Call Hold feature cannot be used during a four-party Conference Call.

Related Programming

• FF1 (System): Unsupervised Conference Timer

• FF2 (Trunk): Unsupervised CO Conference

• FF3 (Extension): Unsupervised Conference

Summary of Contents for VB-44210G











































































































































































































































































































































































































Search results

Summary of Contents for VB-44210G

Reviews:

Related manuals for VB-44210G

Brands by name

Popular brands

Panasonic VB-44210G, User Manual

Search results

Summary of Contents for VB-44210G

Reviews:

Related manuals for VB-44210G

Brands by name

Popular brands