Panasonic VB-44210G User Manual Download Page 72

Page: 72 / 394

Chapter 3. System Features

Section 700 - Operation

Page 3-26

DBS Manual - Revised April 2000

DBS-2.3/9.2-700

2. While still connected to the call, dial:

#3 XXX NNNN *

(where XXX is the Door Box extension number and

NNNN is the Door Opener Access Code, if required - 9999 by default)

3. The door will unlock. Listen for the person to enter the building before

hanging up.

Related Programming

• FF4 (Ringing and Hunt Groups): Ringing Assignments (all)

• FF1 (System Programming): Door Phone Assignments (all)

• FF1 (System Programming): Door Opener ID Requirement

Hardware Requirements

• The Door Box feature requires a Door Box Adaptor (VB-43711), Door

Box (Door Phone) (VA-43705), and door opener. The door opener can be
purchased from an electronics dealer.

• One Door Box can be connected to a Door Box Adaptor.

• Each Door Box Adaptor uses one digital extension port.

• Up to 4 Door Boxes may be connected.

Considerations

• The Door Box extension cannot take part in conference calls or be

overridden.

• Door Box calls cannot be call forwarded or be hunting or coverage group

members.

• The Door Opener can be set to open for 2 to 12 seconds.

Summary of Contents for VB-44210G











































































































































































































































































































































































































Search results

Summary of Contents for VB-44210G

Reviews:

Related manuals for VB-44210G

Brands by name

Popular brands

Panasonic VB-44210G, User Manual

Search results

Summary of Contents for VB-44210G

Reviews:

Related manuals for VB-44210G

Brands by name

Popular brands