Panasonic VB-44210G User Manual Download Page 107

Page: 107 / 394

Section 700 - Operation

Chapter 3. System Features

DBS-2.3/9.2-700

DBS Manual - Revised April 2000

Page 3-61

Trunk Groups

(All Versions)

Description

Trunks can be placed in trunk groups. When a trunk group is accessed, the
DBS automatically selects an open trunk from the group.

Operation

To access a trunk group, do one of the following:

• Dial a trunk group access code before dialing the telephone number. Trunk

group access codes are 9, 81, 82, 83, 84, 85, and 86.

• Press an FF key that is assigned as a pooled trunk key.

Related Programming

• FF2 (Trunks): Pooled Trunk Access for Group “9”

• FF2 (Trunks): Pooled Trunk Access for Groups “81-86”

Considerations

• Trunks can appear in more than one trunk group.

• If Least Cost Routing is enabled, the trunk group “9” automatically

accesses the LCR features.

Summary of Contents for VB-44210G











































































































































































































































































































































































































Search results

Summary of Contents for VB-44210G

Reviews:

Related manuals for VB-44210G

Brands by name

Popular brands

Panasonic VB-44210G, User Manual

Search results

Summary of Contents for VB-44210G

Reviews:

Related manuals for VB-44210G

Brands by name

Popular brands