Panasonic VB-44210G User Manual Download Page 175

Page: 175 / 394

Section 700 - Operation

Chapter 4. Key Telephone Features

DBS-2.3/9.2-700

DBS Manual - Revised April 2000

4-59

Related Programming

• FF1 (System): Extension Intercom Calling

• FF1 (System): Alert Tone for Voice Calls

• FF1 (System): Extension Class of Service Setting (CPC-AII and CPC-B

Version 4.0 or higher)

• FF3 (Extension): Extension Class of Service Assignment (CPC-AII and

CPC-B Version 4.0 or higher)

Considerations

• When an extension’s calling mode is set to voice calling, a “splash” tone

can be sent to alert the extension to the voice call. System programming
determines if the splash tone is provided.

• If an extension is offhook, it will receive tone calls.

• Calls to OPX and analog SLT extensions are always tone calls, regardless

of system programming.

• The voice calling feature is not available for incoming DISA calls.

• Voice calls do not forward if Cover No Answer is turned on.

Last Number Redial

(All Versions)

Description

The last outside number dialed may be redialed automatically by pressing the

REDIAL

key.

Operation

1. Press an unlit line key.

• The phone issues outside dial tone.

• The line LED lights green.

• “CO TALK #XX” (where “XX” is the line number) appears on the

display.

Summary of Contents for VB-44210G











































































































































































































































































































































































































Search results

Summary of Contents for VB-44210G

Reviews:

Related manuals for VB-44210G

Brands by name

Popular brands

Panasonic VB-44210G, User Manual

Search results

Summary of Contents for VB-44210G

Reviews:

Related manuals for VB-44210G

Brands by name

Popular brands