Panasonic VB-44210G User Manual Download Page 106

Page: 106 / 394

Chapter 3. System Features

Section 700 - Operation

Page 3-60

DBS Manual - Revised April 2000

DBS-2.3/9.2-700

The following calling restrictions are also available:

• Station Lockout Key Code Restriction

A key code must be entered before calling out when the Station Lockout
feature is activated.

• Account Code Restriction

An Account Code must be entered before calling out.

• Forced LCR Restriction

The LCR feature controls outside calls.

Related Programming

• FF1 (System): Override Toll Restrictions with SSD Numbers

• FF3 (Extension) Extension Lockout Code

• FF7 (Toll Restriction): Toll Restriction Settings (all)

• FF8 (LCR): Least Cost Routing

Considerations

• The dialing restrictions included in this feature help prevent unauthorized

outgoing calls. It is possible, however, to program your system to allow
System Speed Dialing to override Toll Restrictions.

Summary of Contents for VB-44210G











































































































































































































































































































































































































Search results

Summary of Contents for VB-44210G

Reviews:

Related manuals for VB-44210G

Brands by name

Popular brands

Panasonic VB-44210G, User Manual

Search results

Summary of Contents for VB-44210G

Reviews:

Related manuals for VB-44210G

Brands by name

Popular brands