Panasonic VB-44210G User Manual Download Page 211

Page: 211 / 394

Section 700 - Operation

Chapter 4. Key Telephone Features

DBS-2.3/9.2-700

DBS Manual - Revised April 2000

4-95

To use a Personal Speed Dial Key that links multiple System Speed
Dials:

1. If necessary, select the trunk group (9, 81-86). (Normally the trunk is

selected by the Speed Dials.

2. Press the Personal Speed Dial key.

To manually link speed dial keys together:

1. Pick up the receiver or press

ON/OFF

2. If necessary, access an outside line.

3. Do one of the following:

4. Use the one-touch keys or press

AUTO

and the system speed dial codes

to dial the parts of the phone number until it is completed.

Considerations

• Before linking, you must enter the parts of the telephone number into one-

touch keys or system speed dial codes. For example, program the first part
into one-touch key #1, the second part into one-touch key #2, etc.

• If the trunk access is to be programmed into a Speed Dial, press CONF

then enter the trunk access (9, 1-6 for trunks groups 89, 81-86).

If . . .

Then . . .

You are using a PSD num-
ber

Press the one-touch key
for the first part of the
number

You are using a SSD num-
ber

Press

AUTO

Dial the SSD bin

Summary of Contents for VB-44210G











































































































































































































































































































































































































Search results

Summary of Contents for VB-44210G

Reviews:

Related manuals for VB-44210G

Brands by name

Popular brands

Panasonic VB-44210G, User Manual

Search results

Summary of Contents for VB-44210G

Reviews:

Related manuals for VB-44210G

Brands by name

Popular brands