NXP Semiconductors PN7360AUEV, User Manual

Page: 88 / 345

NXP Semiconductors
UM10858
PN7462 family HW user manual
UM10858 All information provided in this document is subject to legal disclaimers. © NXP B.V. 2018. All rights reserved.
User manual
COMPANY PUBLIC Rev. 1.4 — 14 May 2018
314514
88 of 345
Bit Symbol Access Value Description
17:16
TEMP_DELTA_0 rw 0x01
Selects temperature threshold detection for temperature
sensor 0
15:12
TEMP_CAL_FINE_1 rw 0x08
Trim value fine for temperature sensor 1
11:8
TEMP_CAL_COURSE_1 rw 0x08
Trim value course for temperature sensor 1
7:4
TEMP_CAL_FINE_0 rw 0x08
Trim value fine for temperature sensor 0
3:0
TEMP_CAL_COURSE_0 rw 0x08
Trim value course for temperature sensor 0
Table 79. PCR_HOSTIF_WAKEUP_CFG_REG (address offset 0x1C)
Bit Symbol Access Value Description
31:9 RESERVED rw 0x00 Reserved
8:2 I2C_ADDR rw 0x00 I2C address for wake-up
1 RESERVED rw 0x00 Reserved
0 EN_INTERFACE rw 0x00 1- Enable Wake-up host interface
Table 80. PCR_WAKEUP_CFG_REG (address offset 0x20)
Bit Symbol Access Value Description
31:23 RESERVED rw 0x00 Reserved
22 EN_ADV_RFLD rw 0x00 1: Enable advanced RFLD level detector FSM.
21 EN_VBUS_LOW rw 0x00 1: Enable wake-up when vbus goes low
20:11 WUC_VALUE rw 0x00 Wake-up timer value
10 EN_TVDD_MON rw 0x00 1: Enable wake-up from TVDD 5 V monitor
9
EN_INT_AUX rw 0x00
1: Enable wake-up is TDA (CTUART) gives a level high
interrupt
8 EN_CT_PR rw 0x00 1: Enables wake-up if card is detected.
7 RESERVED rw 0x00 Reserved
6 EN_PVDD_LIMITER rw 0x00 1: Enables wake-up if PVDD current limiter is risen
5 EN_GPIO_INT rw 0x00 1: Enables wake-up if GPIO gives any input
4 EN_TEMP1 rw 0x00 1: Enable temperature 1 error Wake-up
3 EN_TEMP0 rw 0x00 1: Enable temperature 0 error Wake-up
2 EN_RFLDT rw 0x00 1: Enable Wake-up RF level detector
1 RESERVED rw 0x00 Set to “0”
0 EN_WUC rw 0x00 1: Enable Wake-up timer
Table 81. PCR_GPIO_WAKEUP_CFG_REG (address offset 0x24)
Bit Symbol Access Value Description
31:12 RESERVED rw 0x00 Reserved