NOVA electronics Inc. MCX514 -
222
－
222
－
7.5.9
Direction Signal − Setting
Code
Command
５９
h
Direction signal
−
setting
This command is used to set the direction signal DIR to the active level of the – direction before driving when the pulse output
type is 1-pulse 1-direction.
As shown in 11.2, once the driving is started in the 1-pulse 1-direction type, the first pulse of drive pulses will be output after
1CLK from when the direction signal is determined. This command can be used to determine the direction signal in the – direction
when the user needs to take longer time than time to set up the direction signal for drive pulses.
7.5.10 Automatic Home Search Execution
Code
Command
５Ａ
h
Automatic home search execution
This command executes automatic home search.
Before execution of the command, the automatic home search mode and correct parameters must be set. See chapter 2.5 for details
of automatic home search.
