NOVA electronics Inc. MCX514 -
234
－
234
－
7.8.15 Command Reset
Code
Command
００ＦＦ
h Command reset
This command resets the IC.
All the upper 8 bits (D15~D8) of WR0 register must be set to 0.
The user cannot access the IC for a period of 8CLK (500nsec
：
CLK=16MHz) after the command code is written.
Similarly in 8-bit data bus and I2C serial interface bus, this command must write to the high word byte (WR0H).
The user should write 00h into the high word byte (WR0H), and then write FFh into the low word byte (WR0L). Reset will be
executed immediately after writing into the low word byte.
