NEAX2400 IPX Feature Programming Manual
NDA-24297, Issue 1
Page 437
Last Number Called - D
term
L-6D
Operating Procedure (cont’d)
6.
The called party answers the call.
a.) The Prime Line lights green.
b.) The Speaker Lamp is OFF.
Service Conditions
1.
A maximum of 5 destinations can be stored.
2.
The maximum digits of the destination is 32 digits.
3.
When a feature key has been assigned as Last Number Called, the feature key also works as REDIAL key.
4.
This feature is also effective when the calling party presses the REDIAL key while the SPEAKER key is
being pressed.
5.
When the REDIAL key is pressed, # or the REDIAL key must be pressed within 12 seconds. Otherwise,
the calling party hears reorder tone.
6.
The calling party can enter abbreviated codes after pressing the REDIAL key.
7.
Any number entry (other than #) from a D
term
after pressing the REDIAL key is recognized as abbreviated
code(s) (1 or 2 digits) of SPEED CALLING-STATION.
8.
A D
term
can display the upper 16 digits among the stored 32 digits.
9.
When any destination has not been stored in the system, which occurs after initialization of the circuit card,
the D
term
displays no destination as shown below.
10.
When a D
term
user dials the same destination that has already been stored in the system, the newly dialed
destination is stored in the following manner:
11.
The number dialed during the call can be stored as the LAST NUMBER CALL - stock redial with a
maximum of 32 digits.
82625191
10:24 AM FRI 15
LNR [*] / SPD [_ _ _] - 1
MIC
FDB
FDN >>>
blank
No. 25000
Newly Dialed Numbers
Stack #1
Stack #2
Stack #3
Stack #4
Stack #5
No. 82625191
No. 40001
No. 982111
No. 25000
No. 303
Removed
Stack Memory
Previously Stored Destinations
Newly Stored
Stack #1
Stack #2
Stack #3
Stack #4
Stack #5
No. 25000
No. 82625191
No. 40001
No. 9821111
No. 303
Stack Memory
Newly Stored Destinations
