NEAX2400 IPX Feature Programming Manual
Page 270
NDA-24297, Issue 1
D-2
Dial Access To Attendant
FCCS Programming
This data setting describes only the additional or replacement commands used to activate FCCS
services. When used as an FCCS feature, these commands replace the non-network commands (for
example, AAED is replaced by AAEDN). Note that the data setting for FCCS service varies depending
on the node.
STEP 1:
ASPAL
- This data must be assigned to the node calling the attendant.
SRV:
SSC
SID:
2=Operator Call
FPC:
FPC of the node that accommodates the called attendant console
