NEAX2400 IPX Feature Programming Manual
Page 338
NDA-24297, Issue 1
E-1D
Executive Right-of-Way - D
term
FCCS Programming
This data setting describes only the additional or replacement commands used to activate FCCS
services. When used as an FCCS feature, these commands replace the non-network commands (for
example, AAED is replaced by AAEDN). Note that the data setting for FCCS service varies depending
on the node.
Note
STEP 7:
ANPDL
- Assign first digit of access code for EXECUTIVE RIGHT-OF-WAY.
STEP 8:
ASPAL
- Assign an access code for EXECUTIVE RIGHT-OF-WAY, SID 4 for Connection Status
Index (CI) of Busy (B) and Hooking (H).
Note:
When using ASYDL or ASYDN to program an FCCS feature, the basic programming of ASYD is required
in addition to ASYDL or ASYDN.
