NEAX2400 IPX Feature Programming Manual
NDA-24297, Issue 1
Page 395
Inter-position Transfer
I-5
FCCS Programming
This data setting describes only the additional or replacement commands used to activate FCCS
services. When used as an FCCS feature, these commands replace the non-network commands (for
example, AAED is replaced by AAEDN). Note that the data setting for FCCS service varies depending
on the node.
Note
STEP 1:
ASPAL
- This data must be set to the node calling attendant, Assign SRV = SSC, SID = 2 (Operator
Call), and FPC of the node that operator calls are to be terminated to.
Note:
When using ASYDL or ASYDN to program an FCCS feature, the basic programming of ASYD is required
in addition to ASYDL or ASYDN.
