NEAX2400 IPX Feature Programming Manual
Page 528
NDA-24297, Issue 1
M-48
Multi Channel Recording - DAT
Operating Procedure (cont’d)
c.) Press # and enter the message number that has been assigned in the AAST command; receive
service set tone. The service set tone continues for 3 seconds.
d.) Start your recording when the service set tone is stopped.
e.) Replace the handset to finish recording.
Note:
The recording length is a multiple of 2 (= 2n sec).
8.
Playback of a message for ACD
a.) Lift a handset; receive dial tone.
b.) Dial the MULTI CHANNEL RECORDING (REPLAY) access code from the station; receive
special dial tone.
c.) Press # and enter the Message Number that has been assigned in the AADT command.
REC
15
Message Number
RECORDING START
DDD 1
Recording Time
Note
RECORDING END
In 5 seconds
(Time Display)
REPLAY
(Time Display)
REPLAY
15
Message Number
