NEAX2400 IPX Feature Programming Manual
NDA-24297, Issue 1
Page 25
Account Code
A-18
Interactions (cont’d)
5.
The access code for ACCOUNT CODES is restricted to a maximum of three digits.
6.
STATION MESSAGE DETAIL RECORDING [S-10] Split Billing (System Data Option): On transferred
calls, or incoming calls via the Attendant Console, the ACCOUNT CODE will be recorded in all the call
records.
7.
When OUTGOING TRUNK QUEUING [O-2] is initiated, the ACCOUNT CODE will be recorded when
the call is completed.
8.
When a D
term
user initiates the LAST NUMBER DIALED [L-6D] feature, the ACCOUNT CODE will be
recorded, if previously dialed.
Programming
STEP 1:
ASYD
- System Data 1, Index 43, bit 2. Is service set tone sent after the ASPA access code for
ACCOUNT CODE? 0/1: No/Yes. Assign data “1”.
System Data 2, Index 3, bit 4. Is ACCOUNT CODE used with Authorization Code? 0/1: No/Yes.
System Data 1, Index 93, bit 6 = 0.
STEP 2:
ANPD
- Reserve a number level for service feature access. Assign Connection Index, CI = N, H, B;
Normal (N), Hooking (H), and Busy (B) (applicable to any service feature assigned to this level).
Assign NND in accordance with a predetermined numbering plan.
STEP 3:
ASPA
- For SRV = SSC (Service Code) SID = 41, assign the access code. Assign the number of digits
in the ASPA service feature access code plus the number of digits that will appear in the ACCOUNT
CODE for the NND parameter. When ACCOUNT CODE operates with AUTHORIZATION CODE
[A-20], the above assignment is omitted. In ASPA, assign for SRV = SSC (Service Code), SID = 42.
The NND value will include the number of digits in the ASPA service feature access code plus the
number of digits that appear in the ACCOUNT CODE.
For example:
45 - 511234 - 617- 555 - 2323
2
+
6
=
8
ACC + ACCT CODE =
NND
For example:
44 - 623423 - 511234 - 617 - 555 - 2323
2
+
0
+
6
=
8
ACC
+
AUTH CODE
+
ACCT CODE
=
NND
STEP 4:
ASFC
- For stations to use ACCOUNT CODE, assign a Class of Service that allows SFI 27.
STEP 5:
AMND
- If Authorization Codes are used with ACCOUNT CODES, then for Tenant 0, assign the
Destination Code (DC) as the first digit of all Authorization Codes and the Maximum Necessary Digits
(MND) of the Authorization Codes. For the above example, a DC of six is assigned with an MND of
six.
STEP 6:
AATC
- Assign when Authorization Code is used.
