NEAX2400 IPX Feature Programming Manual
NDA-24297, Issue 1
Page 751
Toll Restriction - 3/6-Digit
T-7
Programming (cont’d)
Toll Restriction Examples
Several examples of the use of TOLL RESTRICTION are listed below:
RSC 1:
Allow local only.
RSC 2:
Allow local plus Area Codes 718, 212, 201, and 914.
RSC 3:
Allow local plus Area Codes 718, 212, and 201; and office codes 239, 465, and 798 only
within Area Code 914.
RSC 4:
Allow local plus all Area Codes except 808, 213, 408, and 714.
RSC 5:
Allow local plus all Area Codes, but restrict office code 976 within each Area Code.
To simplify the examples, only one route, (route 1, DDD) will be used. There will be no difference
between Day and Night restrictions. 1 + dialing is assumed with an LCR access code of “9”.
Example 1 - RSC 1 Assignment (Allow local only)
ATDP Command-
TDM/OG:
O (Outgoing Connection)
DAY/NIGHT: D (Day)
OGRT:
1
RSC:
1
DC:
92
TDI:
1 (Connection is Allowed)
Repeat these same assignments for Digit Codes “93” through “99” to allow all local office codes.
Notice that assignments for digit codes “90” and “91”, which cover operator calls and all 1 + Area
Code calls, are not assigned. Digit Codes not assigned are automatically restricted.
AARP Command-
Not Required. This command is only required when TDI = 2 is assigned in ATDP.
Example 2 - RSC 2 Assignment
(Allow local plus Area Codes 718, 212, 201, and 914)
ATDP Command-
TDM/OG:
O (Outgoing Connection)
DAY/NIGHT: D (Day)
OGRT:
1
RSC:
2
DC:
92
TDI:
1 (Connection is Allowed)
Repeat these same assignments for Digit Codes “93” through “99” to allow all local office codes.
To allow Area Codes 718, 212, 201, and 914, repeat the ATDP command for the following Digit
Codes:
DC:
91718
TDI:
1 (Connection is Allowed)
DC:
91212
TDI:
1 (Connection is Allowed)
DC:
91201
TDI:
1 (Connection is Allowed)
DC:
91914
TDI:
1 (Connection is Allowed)
This allows these specific Area Codes.
Area Codes not assigned are automatically restricted.
AARP Command-
Not Required.
Example 3 - RSC 3 Assignment
(Allowed local plus Area Codes 718, 212, and 201; and office codes 239, 465, and 798 only within
Area Code 914.)
ATDP Command-
TDM/OG: O (Outgoing Connection)
