NEAX2400 IPX Feature Programming Manual
Page 92
NDA-24297, Issue 1
B-8
Boss - Secretary - Message Waiting Lamp Control
Service Conditions (cont’d)
5.
This feature is not restricted by CLASS OF SERVICE - INDIVIDUAL [C-15] on either the boss or
secretary stations.
6.
BOSS-SECRETARY MW LAMP CONTROL indication is cleared by system initialization or a Local
Processor initialization.
7.
MW control is provided to stations using the D
term
sub-line when:
a.) one station is talking with another station.
b.) a special purpose button is pushed after a call is established.
c.) the station is calling another station in the network.
d.) CALL WAITING [C-12, 13] is being set up.
e.) the station is using VOICE CALL - D
term
[V-2D].
f.) the ATTENDANT CONSOLE [A-3] indication shows an incoming call.
8.
MW for one station of the network can be controlled from the ATTENDANT CONSOLE [A-3] and any
other station at the same time. The controlled station cannot identify the controlling party.
9.
The MW indication on the boss’ station appears as follows:
10.
The LCD on the secretary’s station displays the following messages:
11.
MW cannot be activated on a virtual line. The LCD displays MW REST, and the reorder tone is heard
when activation from a virtual line is attempted.
Note:
The reorder tone is not heard while talking to the calling party.
12.
This feature can control the Call Indicator Lamp or MW display from the sub-line during:
a.) conversation with the calling party.
b.) special code dialing after replacing the handset or pressing the SPEAKER key.
c.) ringback tone for station calling.
TYPE OF STATION SET
MESSAGE WAITING INDICATION
D
term
Series E
STATUS OF BOSS’ STATION
LCD D
TERM
SERIES E
TYPE OF TONE
MESSAGE
WAITING
(already set)
SETTING
CANCELLING
MESSAGE
WAITING
(not set)
SETTING
Call Indicator is
ON
MW
(Time Display)
MW BUSY
(Time Display)
MW
(Time Display)
CANCEL
MW SET
(Time Display)
