NEAX2400 IPX Feature Programming Manual
NDA-24297, Issue 1
Page 287
Do Not Disturb - D
term
D-11D
Interactions
1.
DO NOT DISTURB may be listed in some literature as available by a programmable Line/Feature key. A
D
term
ACD station is not equipped with a DND key. If DO NOT DISTURB is to be made available to this
station, it must be programmed to a Line/Feature key.
2.
DATA INTERFACE-AUTOMATIC ANSWER may be activated if the D
term
station is in the DO NOT
DISTURB mode.
Programming
STEP 1:
AKYD
- Assign the following key data for the D
term
:
TN:
1
STN:
Station Number
TP:
Type of D
term
0/1:
RING:
0:
No Ringing
1:
Ringing All Lines
2:
Ringing on Prime Line Only
3:
Flexible Ring Assignment, enables RG parameter
KYN: Key Number (1-40)
KYI:
Service Index
0:
Key Not Used
1:
Feature Key
2:
Multi-Line Key
KD:
Not assigned for Feature Key
FKY:
Feature key Number
FKY:
= 50, DO NOT DISTURB
STEP 2:
ADSL
- Assign SN=0 (Idle) and FKY=50 (Do Not Disturb; DND).
This command is used for assigning the function to each soft key.
STEP 3:
ASFC
- Select an indication type (REST/DND) on the display of a D
term
when it terminates to a
station that has been set DO NOT DISTURB.
SFI:
= 114, Calling Party DND Indication (D
term
)
0/1:
REST/DND.
