NEAX2400 IPX Feature Programming Manual
Page 526
NDA-24297, Issue 1
M-48
Multi Channel Recording - DAT
Operating Procedure (cont’d)
e.) Replace the handset to finish playback of the recorded message.
Note:
Even though the recording of a message has been finished, playback of the trunk cannot be accepted until
dubbing of the message to the remaining trunks is complete.
5.
Recording of an announcement for a UCD group
a.) Lift a handset; receive dial tone.
b.) Dial the MULTI CHANNEL RECORDING (RECORDING) access code from the station;
receive special dial tone.
c.) Press * and enter the UCD controlling telephone number.
d.) Wait until you hear service set tone. The waiting time depends upon Register Inter Digit Timer
(normally 6 seconds).
The service set tone continues for 3 seconds.
e.) Start your recording when the service set tone is stopped.
f.) Replace the handset to finish recording.
Note:
The recording length is a multiple of 2 (= 2n sec).
6.
Playback of a message recorded for a UCD group
a.) Lift a handset; receive dial tone.
(Time Display)
REC
(Time Display)
REC
25191
UCD controlling telephone number
RECORDING START
DDD 1
Recording Time
Note
RECORDING END
In 5 seconds
(Time Display)
