NEAX2400 IPX Feature Programming Manual
NDA-24297, Issue 1
Page 575
Paging Access
P-1
Interactions (cont’d)
5.
For simple PAGING ACCESS [P-1], assignments in ASFC are not required. Refer directly to the other
Paging features, such as PAGING TRANSFER
6.
The Attendant can dial the PRIORITY PAGING [P-30] access code and release a station.
7.
When disconnecting from a Paging trunk, the trunk becomes idle immediately.
8.
Paging is possible from a CONSULTATION HOLD [C-17]. Station A places Party B on soft hold and
dials the access code to the Paging trunk. A momentary pressing of the switch hook disconnects the Paging
trunk immediately and reconnects Party B to Station A.
9.
CALL HOLD [C-6]: A Paging trunk cannot be placed on call hold.
10.
BUSY is displayed on the D
term
LCD display when the Paging trunk is busy. Reorder tone is returned.
11.
If PRIORITY PAGING [P-30] is used with PAGING ACCESS [P-1]; ARTD, CDN 6 must be assigned
as data “8”, Page with ringback tone. System Data 1, Index 73 affects the operation of Page routes assigned
Page with ringback tone. Therefore, if PRIORITY PAGING [P-30] is used with PAGING ACCESS [P-
1], then MEET-ME PAGE [M-1, 11] and PAGING TRANSFER [P-10] are not available to the system.
12.
PRIORITY PAGE [P-30] access will not disconnect an Attendant Console engaged in a Paging trunk
connection.
Programming
STEP 1:
ASYD
- System Data 1, Index 73, bits 0 & 1. For PAGING function only, assign data “00”.
STEP 2:
ARTD
- Assign the Paging route as shown below:
RT: 1
1-OSGS
:2
2-ONSG
:3
4-INSG
:3
5-TF
:1
6-TCL
:8
7-L/T
:1
8-RLP
:2
15-LSG
:0/1
44-PRV
:1
STEP 3:
ATRK
- Assign the LEN, Paging Trunk Route Number, Trunk Number, and Tenant Number.
STEP 4:
MBTK
- Assign the Make Idle status to the Paging trunks.
STEP 5:
ANPD
- Assign a level for trunk access. Assign Connection Indexes, CI = N, H; Normal (N), and
Hooking (H). Assign the Number of Necessary Digits according to a predetermined numbering plan.
Busy Lamp Field is not activated.
STEP 6:
ASPA
- Assign the PAGE ACCESS code. Type of Service, SRV = OGC (Outgoing Call). Assign the
proper route number associated with this access code. Assign Connection Indexes, CI = N, H; Normal
(N) and Hooking (H).
STEP 7:
ARSC
- Assign to the station that is allowed access to paging trunks a Route Restriction Class (RSC)
that is allowed these routes in Route Restriction Indexes (RRI) 2 & 3.
FCCS Programming
No unique programming is required for the FCCS network.
